Knowledge &
Resource Center
Milkfat Ingredients
MILK INGREDIENTS
Whey Ingredients
Carbohydrate Ingredients
Infant Formula (IF) Grade Whey Protein Phospholipid Concentrate (WPPC) Standard
v 1.0 | Effective 09/08/2023
Product Definition
Whey Protein Phospholipid Concentrate (WPPC)Product resulting from microfiltration of whey to produce whey protein isolate (WPI) or low fat whey protein concentrate (WPC). WPPC contains whey proteins in addition to whey phospholipids. is a product obtained through the microfiltration of wheyLiquid obtained from cheese manufacture., which concentrates wheyLiquid obtained from cheese manufacture. proteins and wheyLiquid obtained from cheese manufacture. phospholipids. WPPCWhey protein phospholipid concentrate for infant consumption complies with all provisions of the U.S. Federal Food, Drug, and Cosmetic Act.
Standard: Printable PDF
Composition
Parameter | Units of Measure | Limits |
---|---|---|
Protein | % w/w, dry basis | 50.0 minimum |
Milkfat | % | 12.0 minimum |
Total phospholipids | % | 4.0 minimum |
Total moisture | % w/w | 6.0 maximum |
Ash (phosphated) | % w/w | 8.0 maximum |
Other Characteristics
Physico-chemical Properties
Parameter | Units of Measure | Limits |
---|---|---|
Scorched particles | mg/25g | 15.0 maximum |
pH | -- | 5.70 - 7.50 |
Tin (Sn) | mg/kg | 10.00 maximum |
Arsenic (As) | mg/kg | 0.10 maximum |
Lead (Pb) | mg/kg | 0.05 maximum |
Mercury (Hg) | mg/kg | 0.05 maximum |
Cadmium (Cd) | mg/kg | 0.05 maximum |
Nitrites | mg/kg | 2 maximum |
Nitrates | mg/kg | 100 maximum |
Color | visual | white to cream colored |
Flavor and odor | sensory | bland, neutral dairy flavor and odor; free from offensive flavors and odors |
Microbiological Analysis
Parameter | Units of Measure | Limits |
---|---|---|
Standard plate count | CFU/g | 10,000 maximum |
Yeast and mold | CFU/g | 50 maximum |
Coliforms (1) | CFU/g | 10 maximum |
Enterobacteriaceae (1) | CFU/g | 10 maximum |
Salmonella | CFU/25g | not detected |
Staphylococcus (coagulase positive) | CFU/g | not detected |
Bacillus cereus | CFU/g | 100 maximum |
Clostridia (sulfite-reducing) | CFU/g | 100 maximum |
(1) The food industry is trending toward Enterobacteriaceae (“EB”) as the most commonly used category of indicator organisms for gauging general process sanitation. For compliance to this Standard, either coliformsRod shaped, Gram negative bacteria that are found in the digestive tract of warm-blooded animals, and in plant and soil material. Coliforms often are used as an indicator organism for possible fecal contamination. See also total and fecal coliforms. and/or EB shall be utilized, at the discretion of the manufacturer.
Permissible Additives
Whey Protein Phospholipid Concentrate may be pHA measure of the acidity or alkalinity of a material. The pH scale ranges from 0 (acid) to 14 (alkaline) with 7 considered neutral. pH is a measure of the concentration of hydrogen ions and is defined as the negative log of the hydrogen ion concentration. adjusted with an appropriate mineral or organicRegulations that refers to the way agricultural products are grown and processed. Regulations vary from country to country but in the U.S., organic crops must be grown without the use of synthetic herbicides, pesticides and fertilizers or bioengineered genes. acid or base. Any pHA measure of the acidity or alkalinity of a material. The pH scale ranges from 0 (acid) to 14 (alkaline) with 7 considered neutral. pH is a measure of the concentration of hydrogen ions and is defined as the negative log of the hydrogen ion concentration. adjustment agent used for this purpose shall be food grade and shall be used in accordance with U.S. current Good Manufacturing Practices and in accordance with its GRASGenerally recognized as safe status, where applicable.
Methods of Analysis
Parameter | Reference Method |
---|---|
Protein | AOAC 991.20 (N x 6.38) |
Milkfat | AOAC 989.05 |
Total phospholipids | HPLC |
Moisture | AOAC 925.45 |
Ash | AOAC 942.05 |
Scorched particles | ADPI |
pH | USDA |
Heavy metals | ICP-AES |
Microbiological tests | FDA BAM |
Product Labeling
Recommended identifications: Whey Protein Phospholipid Concentrate
Alternative identifications: High Fat Whey ProteinProtein in milk that remains in water phase after casein precipitates. Concentrate
Infant Grade WPPC is specifically suited for use as a functional and nutritive ingredient in infant formula manufacture.
Product should be stored, shipped, and utilized according to the manufacturer’s established recommendations. As guidance, product should be stored and shipped in a cool, dry environment with temperature below 80°F and relative humidity below 65%. Stocks should be rotated and utilized in accordance with the manufacturer’s established date of expiration or retest.
Multiwall kraft bags with polyolefin inner liner, or other suitable closed containers (e.g., totes) are typical.
In no event shall ADPI be liable for any direct, indirect, incidental, special, exemplary, or consequential damages (including, but not limited to: the need to procure substitute goods or services; loss of use, data, or profits; or business interruption) however caused and on any theory of liability, whether in contract, strict liability, or tort (including negligence or otherwise) arising in any way out of the publication, use of, or reliance upon any standard, even if advised of the possibility of such damage and regardless of whether such damage was foreseeable.